|
|
 |
|
 |
|
Dry Running Protection Device TSE
The temperature between the rotor and the stator is permanently sensed thermoelectrically via a temperature sensor integrated in the stator and compared with the limit value set at the TSE control unit.
When the pump runs dry, the temperature will rise due to the increased friction between the rotor and the stator. When the set limit value has been reached, the TSE control unit switches off the pump drive and triggers a fault message.
|
|
|
|
 |
|
Dry Running Protection Device TSE – Food Grade
The general functional principal of the seepex dry running protection devices in food-compatible design is the permanent monitoring of the media flowing around the fork of the vibration limit switch. The fork of the dry running protection device is agitated through natural frequency. Medium flowing through the fork attenuates this natural frequency and thus triggers a signal. If this signal is not extant during pump operation, the pump has run dry and a fault message is issued.
|
|
|
|
 |
|
Impeller
Impellers are mounted on the coupling rod for mixing the conveying medium and for media that tend to sedimentation.
|
|
|
|
 |
|
Dosing Device
The dosing device provides for setting the desired number of rotations for determining a specific delivery volume.
|
|
|
|
 |
|
Lantern Ring Supply Unit
The lantern ring supply unit is used for supplying the shaft sealing with sealing liquid. It can be equipped with a flow meter, if desired. With labyrinth seals, the flow rate can be adjusted and checked.
|
|
|
|
 |
|
CIP Connection
The CIP connection makes it possible to supply the suction chamber with a sufficient amount of rinsing fluid for thorough cleaning of the pump. The tangential arrangement of the branch ensures complete draining.
|
|
|
|
|
|
| |
D – Dosing Pump
Overview of Ranges
|
|
|
|
|
|
|
| |
Individual Documents
Request specific documents and data about your pump.
|
|
|
|
|
|
|
|
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
