T – Open Hopper Pump
When Things Get Really Thick T are used for high-consistency material with low degree of intrinsic flowability or none at all. For these pumping products, the suction lift capability of a standard pump of product group N is no longer sufficient to suck them into pipings. For this reason, pumps of product group T are equipped with a feed hopper and facilities for safe product feeding. It is successfully used in almost all branches of industry to pump viscous to airtight products.
T – Open Hopper Pump
Flow rate | 50 l/h - 500 m³/h | 0.220 USGPM - 2,200 USGPM
Pressure | up to 36 bar | 540 PSI
Sample Design
Advantages and Characteristics Pump with feed hopper and conveyor screw Pitch and diameter of the conveyor screw is adapted to the operating conditions for optimum product feed Optimum solutions for various viscosities and characteristics of the conveying medium Numerous ranges, optionally available in block design or with free shaft ends Service-friendly due to plug-in connections between rotating unit and drive
Range BTQ
For conveying medium to highly viscous products with a low degree of flowability
Conveying capacities: 50 l/h - 100 m³/h
Pressures: up to 24 bar | 360 PSI read more
Range BT
For pumping highly viscous products with a low degree of flowability.
Conveying capacities: 100 l/h - 300 m³/h
Pressures: up to 36 bar | 540 PSI read more
Range BTM
Developed especially for processing fruit and vegetables
Conveying capacities: 0.25 m³/h - 130 m³/h
Pressures: up to 24 bar | 360 PSI read more
Range BTE
For pumping highly viscous to airtight products that do not tend to bridging
Conveying capacities: 0.5 m³/h - 100 m³/h
Pressures: up to 36 bar | 540 PSI read more
Range BTI
For pumping highly viscous to airtight products that tend to form bridges
Bridge breaker with two counter running rotating paddle shafts and a separate drive
Conveying capacities: 100 l/h - 130 m³/h
Pressures: up to 36 bar | 540 PSI read more
Range BTH
For pumping highly viscous to airtight and shear-sensitive products that tend to form bridges
Separately driven ribbon screw rotating concentrically and on the edges
Conveying capacities: 0.5 m³/h - 130 m³/h
Pressures: up to 36 bar | 540 PSI read more
Range BTHE
For pumping highly viscous to airtight products that tend to form bridges
Ribbon screw rotating concentrically and on the edges
Conveying capacities: 0.5 m³/h - 130 m³/h
Pressures: up to 36 bar | 540 PSI read more
Range BTES
For pumping highly viscous to airtight products from silo systems.
Conveying capacities: 0.5 m³/h - 130 m³/h
Pressures: up to 24 bar | 360 PSI read more
Range BTEI
For pumping highly viscous to airtight products that tend to form bridges
Bridge breaker/mixing device with rotating paddle shaft and a separate drive
Conveying capacities: 0.5 m³/h - 100 m³/h
Pressures: up to 36 bar | 540 PSI read more
