CS – Food Grade Pump
A Neat Thing CS are used primarily in the food, pharmaceutics, cosmetics and chemical industry. The pumps with CIP (Cleaning In Place) and SIP (Sterilisation In Place) capabilities meet the highest requirements for gentle handling, hygiene, cleaning and sterilization and comply with the regulations of the 3-A Sanitary Standards of the USA and the EHEDG directives.
CS – Food Pump
Flow rate | 30 l/h -130 m³/h | 0.132 USGPM - 572 USGPM
Pressure | up to 24 bar | 360 PSI
Sample Design
Advantages and Characteristics Service-friendly due to plug-in connections between rotating unit and drive, dismantling/mounting without special tools Optimised, pump housings without clearance volume prevent product deposits High-quality surfaces of the housing walls and the rotating inside parts simplify residual-free cleaning Easily mountable joints increase the service-friendliness Proven mechanical seals adapted to the respective application provide for hygienic shaft sealing. Stator material and secondary seals with FDA approval guarantee high product safety CIP rinsing (Cleaning In Place) with high flow rates in the suction casing provide for residual-free and bacteria-free cleaning SIP (Sterilisation In Place) with superheated steam possible during cycled operation of the pump. The pumps of the CS range comply with the regulations of the 3A-Sanitary Standards of the USA and the EHEDG directives.
Open aseptic joint
Conveying capacities: 30 l/h - 130 m³/h
Pressures: up to 24 bar | 360 PSI read more
For conveying abrasive conveying media
Proven, cost-efficient, closed pin joint
Conveying capacities: 30 l/h - 130 m³/h
Pressures: up to 24 bar | 360 PSI read more
For pumping highly viscous products with a low degree of flowability.
Conveying capacities: 30 l/h - 130 m³/h
Pressures: up to 24 bar | 360 PSI read more
Metering Pumps with open aseptic joints Pumps of product group D for dosing small capacities of low viscous to highly viscous media not only used in the food industry.
