料斗式进料泵

T 料斗式进料泵

苛刻输送工况的输送专家

西派克料斗式进料泵系列为苛刻输送工况开发,专业输送低流动性甚至非流动性的高粘性、高含固率介质。目前该系列已经开发出10大规格型号,几乎适用于所有行业应用。

K主要参数 外观 系列型号
K主要参数
输送能力
50 l/h - 500 m3/h
0.220 - 2,200 usgpm
压力
36 bar
525 psi
特性和优点
  • 料斗式进料和进料螺旋设计
  • 优化定制:料斗和进料螺旋可根据具体工艺要求优化设计
  • 万向节和插销连接检修快捷,维护方便
料斗式进料泵
料斗式进料泵
料斗式进料泵
料斗式进料泵
料斗式进料泵
料斗式进料泵
  • Pressure branch

    with gauge connection. Flange connections alternatively to DIN or ANSI.

  • Stator

    the seal on both ends is moulded as an integral part of the elastomeric stator; corrosion of the stator tube is never a problem because the pumped liquid never comes into contact with the metal tube or the bonding adhesive. Available with optional adjustable stator retensioning device.

  • Rotor

    wear resistant and corrosion-proof materials, with additional surface treatment.

  • Tie bolts/screws

    corrosion proof, optional available in stainless steel design.

  • Compression zone

    with flanges at both ends for quick dismantling when replacing the rotor, hand hole upon request.

  • Coupling rod

    with progressive pitch auger feed screw for power transmission and feeding of viscous products.

  • Feed hopper

    rectangular design, hopper length customized to meet special applications.

  • Universal joint sleeve with holding bands

    protects the grease-filled joints from penetration of the liquid pumped, even in case of maximum vacuum or pressure loading; streamlined design to reduce turbulence and NPSHr.

  • Joint connection

    consisting of just 5 components. Power transmission through wear resistant, hardened and replaceable joint parts: easily repaired.

  • Shaft sealing

    gland packing, alternatively with seal cage ring or grease chamber ring.

  • Plug-in shaft

    connects the drive shaft to the joint; with gland packing the plug-in shaft is used as a shaft protection sleeve; upon request, it is available with wear resistant coating.

  • Lantern

    for connection of pump and drive and to secure the assembly to the baseplate or directly to the foundation.

  • Pump drive

    geared motors, variable speed drives or frequency controlled motors of all major manufacturers, directly flanged to the pump without additional couplings or guards.

系列型号

BTM 型
BTM 型
  • 用于介质中含有大粒径固体比如大块果蔬等的介质
  • 输送能力:0.25 m³/h – 130 m³/h (1.1 USGPM – 572 USGPM)
  • 压力:达24 bar (350 psi)
  • 加长压缩腔集成了破碎切割装置
BTVE 型
BTVE 型
  • 用于不易架桥的高粘度和半固态介质
  • 输送能力:0.5 m³/h – 120 m³/h (2.2 USGPM – 530 USGPM)
  • 压力:达36 bar (525 psi)
  • 矩形进料斗,长度可定制
BTQ 型
BTQ 型
  • 用于流动性很低的中高粘度介质
  • 输送能力:50 l/h – 100 m³/h (0.22 USGPM – 440 USGPM)
  • 压力:达24 bar (350 psi)
  • 设计简洁、结构紧凑,驱动直接法兰联接(直联式)
BT 型
BT 型
  • 用于流动性很低的中高粘度介质
  • 输送能力:50 l/h – 100 m³/h (0.22 USGPM – 440 USGPM)
  • 压力:达24 bar (350 psi)
  • 设计简洁、结构紧凑,驱动直接法兰联接(直联式)
BTI 型
BTI 型
  • 用于易架桥的高粘度至半固态介质
  • 流量:100 l/h – 130 m³/h (0.44 USGPM – 572 USGPM)
  • 压力:达36 bar (525 psi)
  • 矩形进料斗,长度可定制
BTH 型
BTH 型
  • 用于易架桥的高粘度、半固态及剪切敏感类介质
  • 输送能力:0.5 m³/h – 130 m³/h (2.2 USGPM – 572 USGPM)
  • 压力:达36 bar (525 psi)
  • 独立驱动、最大规格的缎状螺旋
BTHE 型
BTHE 型
  • 用于易架桥的高粘度至半固态介质
  • 输送能力:0.5 m³/h – 130 m³/h (2.2 USGPM – 572 USGPM)
  • 压力:达36 bar (525 psi)
  • 缎状螺旋与转动装置同心运动,外圈贴壁推进物料进入传输单元,高效,防架桥
BTES 型
BTES 型
  • 用于高粘度到半固态介质的料仓出料
  • 输送能力:0.5 m³/h – 130 m³/h (2.2 USGPM – 572 USGPM)
  • 压力:达24 bar (350 psi)
  • 矩形进料斗尺寸可定制
BTEI 型
BTEI 型
  • 用于易架桥的高粘度到半固态介质
  • 输送能力:0.5 m³/h – 100 m³/h (2.2 USGPM – 440 USGPM)
  • 压力:达36 bar (525 psi)
  • 破桥/混合装置配有旋转叶轮和独立驱动
BTEX 型
BTEX 型
  • 产品普遍用于农业和沼气工业领域
  • 农业和沼气工业领域的极端输送应用
  • 流量:20–80 m3/h(90–350 USGPM)
  • 压力:高达 8 bar (120 psi)