connection for pressure/vacuum gauge. Flange connections in DIN or ANSI.
Rotor with 6L Geometry
wear resistant and corrosion-proof materials, with additional surface treatment.
Stator with 6L Geometry
the seal on both ends is moulded as an integral part of the elastomeric stator; corrosion of the stator tube is never a problem because the pumped liquid never comes into contact with the metal tube or the bonding adhesive. Available with optional adjustable stator retensioning device.
corrosion proof, optional available in stainless steel design.
for power transmission. Improved design, special designs optional available.
with large cross section and designed for smooth flow conditions, with drain plug and connections for pressure/vacuum gauge. Flange connections in DIN or ANSI can be rotated in 90° increments.
consisting of just 5 components. Power transmission through wear resistant, hardened and replaceable joint parts: easily repaired.
Universal Joint Sleeve with Holding Bands
protects the grease-filled joints from penetration of the liquid pumped, even in case of maximum vacuum or pressure loading; streamlined design to reduce turbulence and NPSHr.
gland packing with or without flushing/seal cage ring or single or double mechanical seals.
connects the drive shaft to the joint; with gland packing the plug-in shaft is used as a shaft protection sleeve; upon request, it is available with wear resistant coating.
Plug-In Shaft Connection
for easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination/gland leakage.
for connection of pump and drive and to secure the assembly to the baseplate or directly to the foundation.
geared motors, variable speed drives or hydraulic motors of all major manufacturers, directly flanged to the pump without additional couplings or guards.