MDC - SANITARY METERING PUMP

In stainless steel, 1/2" connections to DIN EN ISO 228-1 or NPT.

Wear resistant and corrosion-proof materials.

With short pitches and a compact design, the conventional geometry produces high pressures.

With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.

The rotor with Tricam geometry features a three-helix geometry. This enables it to achieve larger conveying capacities with the same overall length of the pump.

In food-grade materials according to FDA, and in compliance with EHEDG directives. Follows pharma regulations according to several USP classes.

With short pitches and a compact design, the conventional geometry produces high pressures.

With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.

The rotor with Tricam geometry features a three-helix geometry. This enables it to achieve larger conveying capacities with the same overall length of the pump.

Open barrel-shaped pin joints that can be cleaned effectively through CIP cleaning.

Mechanical seal product flushed and located within the suction area for optimum cleaning.

A corrosion resistant design, optionally made of stainless steel, connects the pump and drive and secures the assembly to the base plate or skid.

For easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination/gland leakage.

Tailor-made selection of base plates. The base plates can be easily combined with different drives from all major manufacturers.

Geared motors, variable speed drives or frequency controlled motors of all major manufacturers, directly flanged to the pump without additional couplings or guards. Covers made of stainless steel are available.

The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.

This unit protects the shaft sealing by selectively supplying barrier liquid. Also available with flow meter on request.

Mechanical seals arranged in a row. Available in "back-to-back", "face-to-face" or "tandem" sequence.

Universal standard mechanical seal for dosing, food applications and semi-submersible pumps for sealing the plug-in shaft in the suction casing or the hopper.