BCSB - CLOSED PIN JOINTS

Made of stainless steel, polished inside, glass bead blown outside. Allows effective draining. Connection as standard to DIN, Tri Clamp® or any other known fittings

Wear resistant and corrosion-resistant materials. Optionally with hard surface treatment.

With short pitches and a compact design, the conventional geometry produces high pressures.

With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.

Tailor-made selection of base plates. The base plates can be easily combined with different drives from all major manufacturers.

In food-grade materials according to FDA, and in compliance with EHEDG directives. Follows pharma regulations according to several USP classes.

With short pitches and a compact design, the conventional geometry produces high pressures.

With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.

The stator with uniform wall thickness is used in situations with very high pressures or temperatures.

With or without joint sleeve, which protects the grease-filled joints from penetration of the pumped liquid.

Made of stainless steel for power transmission. Available with propellers or feed screw.

Flushed by the product and located inside the suction area for optimal cleaning.

Made of stainless steel for mounting the mechanical seal, available with or without quench.

Designed for easy CIP, made of stainless steel and designed to mount the mechanical seal in food grade material.

A corrosion resistant design, optionally made of stainless steel, connects the pump and drive and secures the assembly to the base plate or skid.

For easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination/gland leakage.

The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.

TSE monitors the temperature of the rotating stator and shuts down the pump when the limit value is reached to protect the pump from dry running.

This unit protects the shaft sealing by selectively supplying barrier liquid. Also available with flow meter on request.

Mechanical seals arranged in a row. Available in "back-to-back", "face-to-face" or "tandem" sequence.