Food Pump

CS Food Pump


SEEPEX food pumps are used in the pharmaceutical, food, cosmetic and chemical industries or wherever a clean, sterile and hygienic atmosphere is needed. They comply with the most stringent hygiene regulations like FDA, 3-A Sanitary Standards and EHEDG and are also maintenance-friendly.

Key Facts views Product Ranges
Key Facts
Conveying Capacity
30 l/h - 130 m3/h
0.132 - 572 usgpm
up to 24 bar
350 psi
Properties & Benefits
  • High product safety: stator material and secondary seals are FDA approved (Food and Drug Administration, USA)
  • CIP (Clean In Place) with high velocity flow in the suction casing
  • US 3-A Sanitary Standards and EHEDG compliance
  • Particularly easy to maintain due to easy-to-assemble joints along with the plug-in connection between the rotating unit and drive
  • No special tools needed for assembly/disassembly
  • Optimized, dead-space-free pump casing prevents product build-up
  • High-quality casing surfaces and the rotating internal parts ensure residue-free cleaning
  • Multiple mechanical seal options ensure hygienic shaft sealing
  • SIP (Sterilization In Place) with superheated steam
Food Pump
Food Pump
Food Pump
Food Pump
Food Pump
  • Pressure Branch

    made of stainless steel, with an internally polished finish and externally satin finish. Designed for efficient dead zone free flow with horizontal off set bottom, to allow complete draining. Standard connection to DIN 11851, 11864 oder Tri Clamp® alternatives.

  • Support

    made of stainless steel, satin finish for superior resistance to corrosive cleaning and sanitizing chemicals.

  • Rotor

    wear resistant and corrosion-proof materials. Alternatively with additional surface treatment.

  • Tie Bolts

    and all other fittings are corrosion proof.

  • Open pin joint

    newly developed hygienic joint, designed for higher pressures and flow rates

  • Suction casing

    made of stainless steel, internally polished external satin finish. Almost “Dead zone free” design with suction connection above the mechanical seal enables CIP solutions to flow through the entire casing. Choice of off-set CIPconnection for almost residue-free cleaning and complete draining. Options with jackets for heating. Standard connections according to DIN 11851, 11864 or Tri Clamp®.

  • Coupling Rod

    made of stainless steel for power transmission, available with propellers or feed screw.

  • Mechanical seal

    flushed by the product and located inside the suction area for optimal cleaning.

  • Mechanical seal housing

    made of stainless steel for mounting the mechanical seal, available with quench.

  • Plug-in shaft connection

    for easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination /gland leakage.

  • Lantern

    in corrosion resistant design, optionally made of stainless steel, for connection of pump and drive and to secure the assembly to the baseplate or skid.

  • Drive

    geared motors, variable speed drives or frequency controlled drives, directly flanged to the pump without additional coupling. Upon request with cover made of stainless steel.


BCSO Range
BCSO Range
  • Highest hygienic standards along with corrosion and wear resistance
  • Conveying capacity: 30 l/h – 130 m³/h (0.132 USGPM – 572 USGPM)
  • Pressure: up to 24 bar (350 psi)
  • Open, aseptic joint ensures residue-free cleaning with CIP
BCSB Range
BCSB Range
  • For abrasive fluids
  • Conveying capacity: 30 l/h – 130 m³/h (0.132 USGPM – 572 USGPM)
  • Pressure: up to 24 bar (350 psi)
  • Proven, closed and cost-effective pin joint
BTCS Range
BTCS Range
  • For highly viscous products with low flowability
  • Conveying capacity: 30 l/h – 130 m³/h (0.132 USGPM – 572 USGPM)
  • Pressure: up to 24 bar (350 psi)
  • Open hopper pump with cylindrical/conical compression zone and auger feed screw