Installation of a SEEPEX Intelligent Metering Pump is no more complicated than a typical home stereo.
SEEPEX Intelligent Metering Pumps integrate gear reducers and SMART programmable vector drives with progressive cavity pumps. Program parameters are factory loaded onto a memory chip, which makes duplication fast and easy. A 4-20 mA process signal can be connected via a terminal strip inside the control box. Several optional control modules are available, which allow manual (potentiometer) and digital speed control. They also allow H-O-A selection, display of pump speed/RPM or flow and allow you to program your own parameter settings.
The gear box provides the unit with strong torque capability across the entire speed range. Unlike DC units, this unit has excellent speed control even in areas, like agricultural or oil production fields, where input line voltages vary. There is also no concern for contamination or maintenance caused by the wearing of commutator brushes.
Features & Accessories
- PLC integration
- Nema 4 enclosure
- Manual speed potentiometer
- Turk connectors for 4-20 mA process control devices
- On/Off switch
- Energy Saving drive
- Fault indicators
- Network connection
- PC interface module
- Power plug connectors
- Thermal sensors for dry run protection
- Flow meters
- Pressure switch for overpressure protection
- UNF connector cable
Dosing a certain preset amount then shutting off
Precisely dosing components into one combined line
maintaining precise, non-pulsating flow levels
Maintain portion control by setting the pump speed to follow another signal. For example, in disinfection you can set the drive to follow a chlorine probe which measure the parts per million of chlorine to water mixture.
Drives can be correlated to a signal to inject chemicals for disinfection, flocculation or multiple component blending. It can also follow a signal from load cells on tanks or capacitance probes in volumetric fillers to maintain a set level.