MD Range

MD Range

SEEPEX MD range pumps are compact units with a high metering accuracy. The stainless steel or synthetic material casings are highly compatible with chemically corrosive media.

Drives & Base Plates Accessories Shaft Seals Download

Conveying Medias

  • For low to highly viscous media, as well as shear-sensitive and chemically aggressive media

Properties

  • Conveying capacity: 0.2 l/h – 1,000 l/h (0.053 USGPH – 264 USGPH)
  • Pressure: up to 24 bar (350 psi)
  • Short, compact design with directly flange-mounted drive (block type)
  • Casing of stainless steel or synthetic material

Benefits

  • High metering accuracy
  • High corrosion resistance due to the variety of components made of Hastelloy C or titanium
  • Low maintenance costs

DRIVES & BASE PLATES

The figures below are examples to demonstrate the various drive and baseplate versions. seepex pumps can be delivered with geared motors, variable speed drives and frequency-controlled drives of all well-known manufacturers. The drive types can be used for all ranges.

Base plate B with geared motor

Line drawing of a SEEPEX baseplate for B geared pumps

Accessories

For a long pump service life: a temperature sensor installed in the stator checks the temperature between rotor and stator and compares it to the limit temperature set in the TSE control. When this value is reached, the control switches off the pump and triggers an alert.

The SEEPEX dry-running protection device monitors the temperature of the stator during operation and protects it from premature wear by switching off the pump when the limit is reached.

SEEPEX dry running protection device

Protection against over-/underpressure: a diaphragm pressure gauge with open flange for highly viscous media switches as soon as the pressure drops below or exceeds the set value.

SEEPEX over pressure and low pressure protection device

For precise metering: with this metering device you can set the required number of rotations, making it possible to adjust the flow rate to the exact requirements.

SEEPEX metering device

For shaft seal protection: the seal barrier system is fed with a buffer liquid. Upon request, it can be equipped with a flow meter that ensures trouble-free operation.

SEEPEX lantern ring supply unit

Shaft Seals

  • Double-acting
  • Design with elastomer bellows, metal springs or spring sets
  • Independent of direction of rotation Unbalanced
  • Disengaging device
SEEPEX double acting mechanical seal
Conveying Material

from low to high viscosity, with or without solids, abrasive, crystallizing, corrosive, toxic

Pressure Range
-14.5 - +363 psi
  • Design with elastomer bellows, metal springs or spring packs
  • Independent of direction of rotation, balanced/unbalanced
  • Disengaging device
  • Food grade design with FDA materials
  • Quench design as an option
SEEPEX Single acting mechanical seal
Conveying Material

from low to high viscosity, with or without solids, abrasive, crystallizing

Pressure Range
-0.15 - +25 bar
-2.2 - +363 psi

Informations

Download

IN_Product_Group_D_0608e_01.pdf pdf 326 KB
IN_P_0709e_12.pdf pdf 326 KB
IQ-NET_ISO_14001_23.pdf pdf 112 KB
ISO_9001-2008_Certificate_exp._Sept_2015_25.pdf pdf 1 MB