MDT Range

MDT Range

SEEPEX MDT range pumps have an open hopper with cylindrical compression zone. The auger feed screw on the coupling rod feeds the viscous product to the rotor and stator.

Accessories Shaft Seals

Conveying Medias

For highly viscous products with low flowability

Properties

  • Conveying capacity: 5 l/h – 500 l/h (1.32 USGPH – 132 USGPH)
  • Pressure: up to 24 bar (350 psi)
  • Open hopper pump with compression zone and auger feed screw

Benefits

  • High volumetric efficiency with optimum filling of the conveying chamber due to the system pressure produced in the compression zone

Accessories

For a long pump service life: a temperature sensor installed in the stator checks the temperature between rotor and stator and compares it to the limit temperature set in the TSE control. When this value is reached, the control switches off the pump and triggers an alert.

The SEEPEX dry-running protection device monitors the temperature of the stator during operation and protects it from premature wear by switching off the pump when the limit is reached.

SEEPEX dry running protection device

Protection against over-/underpressure: a diaphragm pressure gauge with open flange for highly viscous media switches as soon as the pressure drops below or exceeds the set value.

SEEPEX over pressure and low pressure protection device

For precise metering: with this metering device you can set the required number of rotations, making it possible to adjust the flow rate to the exact requirements.

SEEPEX metering device

For shaft seal protection: the seal barrier system is fed with a buffer liquid. Upon request, it can be equipped with a flow meter that ensures trouble-free operation.

SEEPEX lantern ring supply unit

Shaft Seals

  • Double-acting
  • Design with elastomer bellows, metal springs or spring sets
  • Independent of direction of rotation Unbalanced
  • Disengaging device
SEEPEX double acting mechanical seal
Conveying Material

from low to high viscosity, with or without solids, abrasive, crystallizing, corrosive, toxic

Pressure Range
-14.5 - +363 psi
  • Design with elastomer bellows, metal springs or spring packs
  • Independent of direction of rotation, balanced/unbalanced
  • Disengaging device
  • Food grade design with FDA materials
  • Quench design as an option
SEEPEX Single acting mechanical seal
Conveying Material

from low to high viscosity, with or without solids, abrasive, crystallizing

Pressure Range
-0.15 - +25 bar
-2.2 - +363 psi