D Metering Pump
TO THE EXACT DROP
SEEPEX metering pumps achieve a metering accuracy of ±1%. They’re used wherever low to highly viscous media, media containing solids and chemically corrosive media are processed and all with low pulsation and to the exact drop.
- Modular system for quick and easy conversion
- Low pulsation pumping
- High metering accuracy (deviation ±1%)
- Easy maintenance due to the plug-in connection
- Material combinations available for all conveying products
- Multiple drive combinations possible
in stainless steel, 1/2" connections to DIN EN ISO 228-1or NPT.
in stainless steel, enabling the use of all sizes of rotor/stator giving inter- changeability with only one housing and drive unit.
the seal on both ends is moulded as an integral part of the elastomeric stator; corrosion of the stator tube is never a problem because the pumped liquid never comes into contact with the metal tube or the bonding adhesive.
wear resistant and corrosion-proof materials.
in stainless steel, 1" connection to DIN EN ISO 228-1 or NPT, can be rotated in 90° increments, with drain plug, available with gauge or flushing connections.
with two pin joints with hardened and wear resistant components, easily assembled, grease lubricated and positively sealed with elastomer sleeves and two holding bands.
single acting mechanical seal. Alternatively, a double acting mechanical seal or gland packing are available.
for connection of pump and drive.
connects the drive shaft to the joint; with gland packing the plug-in shaft is used as a shaft protection sleeve.
Plug-in shaft connection
for easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination/ gland leakage.
geared motors, variable speed drives or hydraulic motors of all major manufacturers, directly flanged to the pump without additional couplings or guards.