CS Food Pump
ABSOLUTELY CLEAN
SEEPEX food pumps are used in the pharmaceutical, food, cosmetic and chemical industries or wherever a clean, sterile and hygienic atmosphere is needed. They comply with the most stringent hygiene regulations like FDA, 3-A Sanitary Standards and EHEDG and are also maintenance-friendly.
- High product safety: stator material and secondary seals are FDA approved (Food and Drug Administration, USA)
- CIP (Clean In Place) with high velocity flow in the suction casing
- US 3-A Sanitary Standards and EHEDG compliance
- Particularly easy to maintain due to easy-to-assemble joints along with the plug-in connection between the rotating unit and drive
- No special tools needed for assembly/disassembly
- Optimized, dead-space-free pump casing prevents product build-up
- High-quality casing surfaces and the rotating internal parts ensure residue-free cleaning
- Multiple mechanical seal options ensure hygienic shaft sealing
- SIP (Sterilization In Place) with superheated steam
- Photography
- 3D View
- Hotspot View
-
Stator
Equal wall or standard design. Seals are an integral part of the elastomer stator. In food grade light and black or Class VI materials.
-
Pressure Branch
Made of stainless steel, polished inside, glass bead blown outside. Allows effective draining. Connection as standard to DIN, Tri Clamp® or any other known fittings.
-
Flexrod
Flexible titanium shaft without joints. Hygienic cleaning through CIP and SIP possible. Simple dasassembly of rotor and drive shaft.
-
Suction connection
Patent-pending inlet with CFD-optimized geometry for residue-free cleaning.
-
Split suction casing
For easy maintenance of the rotating unit and the mechanical seal without dismantling the suction pipe
-
Mechanical seal
Flushed by the product and located inside the suction area for optimal cleaning.
-
Plug-in shaft
CIP cleaning possible, made of stainless steel and developed for assembly of the mechanical seal. Easy dismantling of pump and drive.
-
Lantern
Corrosion-proof design, optionally in stainless steel. For mounting the pump and drive unit as well as securing the assembly to the base plate or directly on a foundation.
-
Base plate
Made of stainless steel, glass bead blown. For the support and attachment of the pump.
-
Rotor
Made of wear and corrosion-resistant materials. Optionally with hard surface treatment.
-
Drive
Geared motors, variable speed drives or frequency controlled drives of all well-known manufacturers, flanged directly to the pump without additional coupling. On request with stainless steel cover.
