
D Metering Pump
TO THE EXACT DROP
SEEPEX metering pumps achieve a metering accuracy of ±1%. They’re used wherever low to highly viscous media, media containing solids and chemically corrosive media are processed and all with low pulsation and to the exact drop.
- Modular system for quick and easy conversion
- Low pulsation pumping
- High metering accuracy (deviation ±1%)
- Easy maintenance due to the plug-in connection
- Material combinations available for all conveying products
- Multiple drive combinations possible
- Photography
- 3D View
- Hotspot View


-
Drive
geared motors, variable speed drives or hydraulic motors of all major manufacturers, directly flanged to the pump without additional couplings or guards.
-
Plug-in shaft connection
for easy dismantling of the pump and drive enabling quick replacement of the rotating parts and shaft seals. The plug-in shaft pin secures the shaft connection to the drive and the splash ring protects the bearing from contamination/ gland leakage.
-
Plug-in shaft
connects the drive shaft to the joint; with gland packing the plug-in shaft is used as a shaft protection sleeve.
-
Lantern
for connection of pump and drive.
-
Shaft seal
single acting mechanical seal. Alternatively, a double acting mechanical seal or gland packing are available.
-
Coupling rod
with two pin joints with hardened and wear resistant components, easily assembled, grease lubricated and positively sealed with elastomer sleeves and two holding bands.
-
Suction casing
in stainless steel, 1" connection to DIN EN ISO 228-1 or NPT, can be rotated in 90° increments, with drain plug, available with gauge or flushing connections.
-
Rotor
wear resistant and corrosion-proof materials.
-
Stator
the seal on both ends is moulded as an integral part of the elastomeric stator; corrosion of the stator tube is never a problem because the pumped liquid never comes into contact with the metal tube or the bonding adhesive.
-
Stator adapter
in stainless steel, enabling the use of all sizes of rotor/stator giving inter- changeability with only one housing and drive unit.
-
Pressure branch
in stainless steel, 1/2" connections to DIN EN ISO 228-1or NPT.