BTHE - WITH EDGE-TO-EDGE RIBBON SCREW

With gauge connection. Flange connections alternatively to DIN or ANSI.

Optimized compression between the rotor and stator using wear-resistant and corrosion-resistant materials. A wide range of alloys, coatings and elastomers are available for each.

With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.

With short pitches and a compact design, the conventional geometry produces high pressures.

The seal on both ends is moulded as an integral part of the elastomeric stator; corrosion of the stator tube is never a problem because the pumped liquid never comes into contact with the metal tube or the bonding adhesive. Available with optional adjustable stator retensioning device.

With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.

With short pitches and a compact design, the conventional geometry produces high pressures.

Corrosion proof, optional available in stainless steel design.

Packing or mechanical seals are available in many material combinations.

Auger feed screw reduces backflow of medium, ensuring optimized filling of the pump cavities.

Made from stainless steel and protects the joint against mechanical damage.

Ensures optimal feeding of the media. Quick and easy maintenance: available as a conical compression casing in conjunction with Smart Conveying Technology or as a sliding compression casing.

With progressive pitch auger feed screw for power transmission and feeding of viscous products.

Concentric feed screw with maximized pitch length which self cleans the hopper walls, prevents bridging of the medium in the feed hopper and enhances feeding of the pumping elements.

With vertical hopper walls and a generous cross section. The hopper liner stabilizes the ribbon screw and protects it against wear. The hopper length can be individually fabricated.

Connection for cleaning, emptying or diversion.

For connection of pump and drive and to secure the assembly to the baseplate or directly to the foundation.

Geared motors, variable speed drives or frequency controlled motors of all major manufacturers, directly flanged to the pump without additional couplings or guards. Covers made of stainless steel are available.

The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.

TSE monitors the temperature of the rotating stator and shuts down the pump when the limit value is reached to protect the pump from dry running.

With this device, a worn stator can be evenly readjusted at several points so that the clamping between the rotor and stator is once again optimal and the pump performance increases.

With the Retrofit Kit, many standard and open hopper pumps can be upgraded to Smart Conveying Technology (SCT).

Universal seal for hopper and standard pumps for sealing the plug-in shaft and suction casing or feed hopper. Also available with grease or lantern ring to shut off the media flow. Can also be supplied with upstream labyrinth seal and additional flush connection or lubricating device.

Universal standard mechanical seal for dosing, food applications and semi-submersible pumps for sealing the plug-in shaft in the suction casing or the hopper.

Ready-to-install pre-assembled units with supply connections and attachment brackets for quick replacement.

Stainless steel protective housing protects the universal joint sleeve from mechanical destruction by rough parts made of plastic, metal, wood, etc. Up to 10,000 operating hours guaranteed.

Short base plate B with geared motor for all standard applications.

The optional sliding casing allows access to the drive side's universal joint for quick maintenance.