Features and Benefits
Technologies, accessories and options
-
Pressure branch
Available with Class 300 or Class 150 flanges. Nozzle loads 2x API 676 standard.
-
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
-
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
-
Rotor
Wear resistant and corrosion-proof materials.
-
Conventional geometry
With short pitches and a compact design, the conventional geometry produces high pressures.
-
6L geometry
With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.
-
Equal Wall Stator
The stator with uniform wall thickness is used in situations with very high pressures or temperatures.
-
Stator
Available in a wide range of elastomer materials and for 6, 12, 24 and 48 bar pressure.
-
Tie bolts/screw
Corrosion proof, optional available in stainless steel design.
-
Suction casing
Designed with MACP 50 bar. Casing rotatable in 90° increments. Available with Class 300 or Class 150 flanges. Nozzle loads 2x API 676 standard.
-
Coupling rod
For power transmission. Improved design, optional special designs available.
-
Drain Connection
Cast 90° elbow, ¾” class 300 flanged.
-
Joint connection
Consisting of just 5 components. Power transmission through wear resistant, hardened and replaceable joint parts: easily repaired.
-
Universal joint sleeve with holding bands
Protects the grease-filled joints from penetration of the liquid pumped, even in case of maximum vacuum or pressure loading. Streamlined design to reduce turbulence and NPSHr.
-
Mechanical Seal
Fully compliant with API 682.
-
Lantern
Made of cast stainless steel. Seal chamber dimensions according to API 610.
-
Standard base plate
Short base plate B with geared motor for all standard applications.
-
Drive
Reduction gearbox with NEMA or IEC electrical motor.
-
Overpressure Protection
The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.
-
Dry-running protection device (TSE)
TSE monitors the temperature of the rotating stator and shuts down the pump when the limit value is reached to protect the pump from dry running.
-
Seal barrier system
This unit protects the shaft sealing by selectively supplying barrier liquid. Also available with flow meter on request.
Follow Us
