1. Products
  2. PUMP SYSTEMS
  3. MIN - MINE DEWATERING UNIT
Back to the product list

MIN - MINE DEWATERING UNIT

MOBILE GROUND WATER MANAGEMENT

The SEEPEX Mine Dewatering Unit is engineered for efficient spearation of oversized solids and conveying of mine water. The unit consists of a skid baseplate, tank, pipework, and a pump with a drive and controls. The compact design enables easy transport and the option to retrofit into existing dewatering units.

Conveying Capacity
≤ 72 m³/h
≤ 317 US gpm
Pressure
≤ 24 bar
≤ 350 psi
Contact Us
Request a Quote Request Service, Parts or Support
Share

Features and Benefits

Easy to maintain

Sliding casing, easy detachable tie rods and movable ladder for easy access to pump and settling tank

Automated

Level control enables automatic operation and adjusts speed based on fluid level in hopper

High pressure capability

Equal wall stators allow for higher pressures without increasing the size of the pump

Leightweight

Compact Design allows easy transport and placement of complete skid where needed

Time-saving

Suction and discharge pipework can remain in place when changing rotor and/or stator

Customizable

Customizable design for pump and settling tank according to various flows and pressures

Technologies, Accessories and Options

  • Technology
  • Accessories
  • Options
null

  • Pump valve manifold

    Two outlets for sludge or solids removal.

  • Skid baseplate

    Has a compact, bi-directional design and lifting lugs for simple transport.

  • Settle tank

    Configured to control solids and handle overflow. Standard capacity of 3,300 liters (727 gal.).

  • Rotor and stator

    Optimized compression between the rotor and stator using wear-resistant and corrosion-resistant materials. A wide range of alloys, coatings and elastomers are available for each.
    null

  • Conventional geometry

    With short pitches and a compact design, the conventional geometry produces high pressures.
    null

  • Equal Wall Stator

    The stator with uniform wall thickness is used in situations with very high pressures or temperatures.
    null

  • Ladder

    A lightweight, maneuverable work platform.

  • Galvanized steel frame

    A protective coating on the skid and pipework to prevent rust.

  • Drive

    According to the local mining specifications.

  • Level control

    Enables automatic operation.

  • Overpressure Protection

    The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.
    null

  • Dry-running protection device (TSE)

    Protects against damage to the stator through dry-running. Optionally available.

  • Standard Gland Packing

    Universal seal for hopper and standard pumps for sealing the plug-in shaft and suction casing or feed hopper. Also available with grease or lantern ring to shut off the media flow. Can also be supplied with upstream labyrinth seal and additional flush connection or lubricating device.
    null

  • Single-acting mechanical seal

    Universal standard mechanical seal for dosing, food applications and semi-submersible pumps for sealing the plug-in shaft in the suction casing or the hopper.