BTVE - WITH ROBUST FULL SCREW

With gauge connection. Flange connections alternatively to DIN or ANSI.

Optimized compression between the rotor and stator using wear-resistant and corrosion-resistant materials. A wide range of alloys, coatings and elastomers are available for each.

The seal on both ends is moulded as an integral part of the elastomeric stator; corrosion of the stator tube is never a problem because the pumped liquid never comes into contact with the metal tube or the bonding adhesive. Available with optional adjustable stator retensioning device.

With a small rotor diameter and a long pitch, the 6L geometry attains lower surface velocities and extends the service life due to its large sealing line.

With short pitches and a compact design, the conventional geometry produces high pressures.

Sliding separate casing with enlarged cross section ensures quick and easy maintenance.

With vertical hopper walls to prevent bridging or clogging and a generous cross section. The hopper length can be individually fabricated.

Designed with increased blade thickness, a long pitch and enlarged diameter for optimal product feeding.

Connection for cleaning, emptying or diversion.

For connection of pump and drive and to secure the assembly to the baseplate or directly to the foundation.

Packing or mechanical seals are available in many material combinations.

Geared motors, variable speed drives or frequency controlled motors of all major manufacturers, directly flanged to the pump without additional couplings or guards. Covers made of stainless steel are available.

The pressure gauge switches off the pump as soon as a pre-set pressure is exceeded or not reached and protects the pump from increased wear and tear or piping damage.

TSE monitors the temperature of the rotating stator and shuts down the pump when the limit value is reached to protect the pump from dry running.

With this device, a worn stator can be evenly readjusted at several points so that the clamping between the rotor and stator is once again optimal and the pump performance increases.

Stainless steel protective housing protects the universal joint sleeve from mechanical destruction by rough parts made of plastic, metal, wood, etc. Up to 10,000 operating hours guaranteed.

Short base plate B with geared motor for all standard applications.

Quick and easy access to the drive sided joint.

Universal seal for hopper and standard pumps for sealing the plug-in shaft and suction casing or feed hopper. Also available with grease or lantern ring to shut off the media flow. Can also be supplied with upstream labyrinth seal and additional flush connection or lubricating device.

Universal standard mechanical seal for dosing, food applications and semi-submersible pumps for sealing the plug-in shaft in the suction casing or the hopper.

Ready-to-install pre-assembled units with supply connections and attachment brackets for quick replacement.

Universal seal for hopper and standard pumps for sealing the plug-in shaft and suction casing or feed hopper. Also available with grease or lantern ring to shut off the media flow. Can also be supplied with upstream labyrinth seal and additional flush connection or lubricating device.

Ready-to-install pre-assembled units with supply connections and attachment brackets for quick replacement.

Universal standard mechanical seal for dosing, food applications and semi-submersible pumps for sealing the plug-in shaft in the suction casing or the hopper.